Christmas Tree
Model: ALE52021850SEC
Sku # 619 391
Operation
Turning on the tree
Maintenance
Care and Cleaning
Troubleshooting
Spare parts
Repairing Loose Hinges
Problem Solution
The tree does
not light
Ensure that all tree sections are plugged
into each other and that the tree is
plugged into the wall. If your tree came
with a foot pedal, step on the
On/Off button.
Check for blown fuses at the power cord
plug. Replace as needed with the
replacement fuses provided.
Check for loose, broken, or missing bulbs
and replace as needed with the
replacement bulbs provided
Step 3.Shape the branches to your preference by working
from the bottom to the top. When adjusting
branches, ensure that all wires are free of branch
hinges.
Step 4.Connect the plug(s) securely to the extension cord(s)
as per the color labels indicated in attached photo
and insert the green label extension cord plug into
the wall outlet.
Step 5.When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
NOTE: If some bulbs do not light or flicker, search for any
loose plugs and/or broken, loose, or missing bulbs. Replace
bulbs promptly with the replacement bulbs provided in
order to maintain the performance and life expectancy of
your tree.
Step 1.Connect the light strings of the tree together and
plug the power cord into a wall outlet.
Step 2.If the tree comes with a foot pedal, step on the
On/Off button.
This tree package includes hinge pins, washers, bulbs and
fuses for any replacement or repair that you need to
perform on your tree. If extra parts are needed, contact the
Customer Service Team at 1-877-527-0313 between the
hours of 8 am and 5 pm EST, Monday through Friday.
Step 1.Remove all ornaments and decorations.
Step 2.Unplug the cord from the wall and then unplug each
section of the tree.
Step 3.Gently lift the tree top straight up to remove from the
center sections and fold all branches towards the
pole.
Step 4.Repeat this step for the bottom tree section.
Step 5.Carefully place all tree sections into a shipping box
and tape it shut.
Step 6.Store your tree in a cool, dry place away from sunlight.
Step 1.Place the branch into the slot of the bracket.
Step 2.Insert a new hinge pin through the holes of the
bracket and secure with a washer.
WARNING - Risk of fire: This product employs overload
protection (fuse lamp) in each series light circuit to
provide overload protection in addition to the fuse(s)
located in the plug. Do not replace the fuse lamp
contained in this set with any other type of lamp, use
only spare fuse lamps provided with this product. In case
of a burnt out FUSED lamp, the entire series of 50 lamps
will be out. To replace the fused lamp:
1. Grasp the plug and remove
from the receptacle or other
outlet device. Do not unplug
by pulling the cord.
2. Locate the fused lamp with
gray color lamp holder. Pull the burnt fused lamp and
plastic lamp base straight out of the lamp holder.
3. Replace with a spare fused lamp. The fused lamp can
be distinguished by a gray lamp base and an
additional clear plastic cover.
4. Plug in the lights again.
User servicing instructions
Fused Lamp Replacement
(1 pages)
(2 pages)
(9 pages)
(3 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals